Safety Capability of an All-Electric Production System | OneSubsea
Tech Paper
Location
Offshore
Byline
Carsten Mahler, OneSubsea; Markus Glaser and Simon Schoch, Aalen University; Stefan Marx and Stefan Schluenss, SubCtech GmbH; Tobias Winter and Julian Popp, Aalen University; Sebastian Imle, Wittenstein Motion Control
Society
OTC
Paper Number
29472
Presentation Date
May 6–9, 2019
Products Used
Premium

Safety Capability of an All-Electric Production System



Abstract

The all-electric control system, as proposed with this paper, provides improved HSE, reduced costs, and increases safety and reliability compared to an electrohydraulic system. This paper describes the approach for the development of a novel all-electric safety actuation system. Key to this concept is the centralized battery, which is utilized to provide the system with the required amount of energy during valve actuation for normal operation and in case of a power cut or communication loss. Since instantaneous power for valve operation is supplied by the battery, continuous power demand remains at a similar level for current electrohydraulic solutions.

This paper includes a detailed analysis to evaluate the safety and reliability capability of the proposed all-electric system. It also covers root causes for failure modes and suitable mitigations to prevent occurrence or for failure impact reduction. Further objective is the analysis of common cause failures, which are critical for safety function execution. The paper is a result of the work of a joint industry project.

THIS ITEM IS PREMIUM CONTENT. TO ACCESS THE FULL CONTENT, SIGN IN OR REGISTER BELOW.
Sign in or register
Products Used

Share This